How to maintain the aluminum alloy boat

The maintenance of aluminum alloy ship involves many aspects, such as regular cleaning and maintenance, inspection and maintenance, cabin maintenance, electrical system maintenance, etc. Through these maintenance measures, the use of aluminum alloy ship can be effectively extended and good condition and performance can be maintained.

1. Cleaning and maintenance

Regular cleaning: After each use, especially after use in a seawater environment, the aluminum alloy hull should be thoroughly cleaned with fresh water to remove salt and dirt and prevent corrosion.

Use neutral cleaners: Avoid using cleaners that contain acids or alkalis, as these chemicals may damage the surface of the aluminum alloy.

2. Anti-corrosion treatment

Electrochemical corrosion protection: The installation of zinc or aluminum anodes on the hull can effectively prevent electrochemical corrosion. Regularly check and replace the anode.

Coating protection: A layer of anti-corrosion coating or anti-fouling paint on the hull surface can further enhance the anti-corrosion performance.

3. Inspection and maintenance

Periodic Inspection: The hull, especially at welds and joints, is inspected regularly for signs of cracks, deformation or corrosion.

Timely repair: if any damage or corrosion is found, repair should be carried out in time to prevent the problem from expanding.

4. Cabin maintenance

Keep dry: Make sure the interior of the cabin is dry and avoid water accumulation. Dehumidifying equipment or moisture-absorbing materials may be used.

Clean and ventilated: Clean the cabin regularly to maintain good ventilation to prevent mold and odor.

5. Mechanical and electrical system maintenance

Engine maintenance: In accordance with the manufacturer's recommendations, regularly carry out engine maintenance and maintenance, including changing the oil, filter, etc.

Electrical system inspection: regularly check the electrical system to ensure that the wiring is firm and free of corrosion and the battery is in good condition.

6. Store and dock

Proper storage: If it is not used for a long time, the vessel should be stored in a dry environment, preferably covered with a tarpaulin to avoid direct sunlight and rain erosion.

Safe docking: Use appropriate fender pads when docking to prevent damage caused by collision between the hull and the dock or other ships.