The maintenance method of the painted boat

Release time:

2024-07-26

The best season for maintenance of a painted boat is summer. Pull the whole boat up and scrape off the "old pit" with a scraper. Clean up the leaking or cracked areas first, and then repair and embed them

The most important step in maintenance is to "scrape". The "old pits" of the original boat must be scraped clean, just like an operation, and all the bad ones must be removed.

The next step is to apply tung oil. Don't apply a lot of tung oil to the original boat at once, otherwise it will easily agglomerate, and it will be difficult to absorb if you apply another layer. Only when all the tung oil on the original boat is absorbed and the surface is dry can you apply another layer.

Finally, the fine hemp silk is selected to be torn into hair shape, and then tung oil is added with hydrated lime to make "oil lime". After mixing with hemp silk evenly, the loophole in the first step is filled, and the dried painted boat can be launched again.